SENSORS & EQUIPMENTS

MOISTER SENSORS DISPENCING EQUIPMENTS

MOISTER SENSORS - SENSOR FOR GRAIN

HYDRO-PROBE XT
MOISTURE SENSOR FOR GRAIN, ANIMAL FEED, NUTS AND ORGANIC MATERIALS
The Hydro-Probe XT has been designed to measure moisture in grain, animal feed, nuts and other organic and agricultural materials. It has integral signal processing which provides a linear output (both digital and analogue) and it can easily be connected to any control system.

Designed for use in processing plants which use bins (silos), chutes and conveyor or feed belts, the sensor is positioned into the flow of material and measurements are taken 25 times per second as the material passes over or around the sensing face. This means the sensor rapidly detects changes in moisture levels enabling real time adjustments to the moisture content of the material to be made during processing if required. This ensures the manufacturer can continually produce a consistent, quality product and reduce costs by limiting the amount of wasted or spoilt materials.

The Hydro-Probe XT incorporates the unique Hydronix digital measurement technique for extreme precision and also provides a choice of measurement modes allowing the user to select the most appropriate mode based on the material being measured. The sensor is also equipped with on-board functionality such as configurable digital inputs and outputs, signal smoothing, batch averaging and high and low moisture alarms. This versatile moisture sensor may be used as a stand-alone unit with a display such as the Hydro-View, or easily integrated with a third party automation system using the analogue and digital communications.

Technology: Digital Microwave
Measuring Range: Up to saturation of Material
Output: 4 - 20 / 0 – 20mA, 0- 10V, RS485
Body Construction: SS316
Face Plate: Ceramic
Temperature: 0 to +60ºC
Microwave penetration: 75 – 100mm dependent on material
Readings/second: 25
Accuracy: +/-0.2
Supply: 15 – 30 V DC

MOISTER SENSORS - MIXERS & CONVEYORS

HYDRO-MIX
FOR MOISTURE MEASUREMENT IN MIXERS & CONVEYORS
The Hydro-Mix is a rugged, flush mounted microwave moisture measurement sensor for mixers and conveyors in process control environments. Designed by Hydronix to be installed in the turbulent environment of a mixer, the Hydro-Mix features integral signal processing and is easily connected to any control system. The sensor measures at 25 times per second which enables rapid response to any changes in moisture content, including the determination of homogeneity.

The Hydro-Mix sensor offers a choice of measurement modes for optimising the sensor performance typically for minerals such as sand, aggregates and concrete or for measuring moisture in organic materials such as grain, nuts and oil. The sensor is designed to be fitted flush within a mixer, screw conveyor (auger) or in a chute. For conveyor belt applications, the Hydro-Mix sensor is installed using the Hydro-Skid pantograph arm enabling the sensor to ride over the surface of the flowing material.

Remote configuration, calibration, diagnostics and firmware upgrades can easily be undertaken using Hydronix Hydro-Com software. This allows direct integration with any control system without the requirement of any other interface unit. Combined with on-board functionality such as signal processing, smoothing and averaging, the Hydro-Mix is simple to integrate.

Technology: Digital Microwave
Measuring Range: Up to saturation of Material
Output: 4 - 20 / 0 – 20mA, 0- 10V, RS485
Body Construction: SS316
Sensing Face: Ceramic
Protection Ring: Hard Steel
Temperature: 0 to +60ºC
Microwave penetration: 75 – 100mm dependent on material
Readings/second: 25
Accuracy: +/-0.2
Supply: 15 – 30 V DC

MOISTER SENSORS - BINS & CHUTES

HYDRO-PROBE
MOISTURE SENSOR FOR BINS, CHUTES AND CONVEYOR BELTS
The Hydro-Probe was the first moisture sensor to use the digital microwave moisture measurement technique. It has integral signal processing which provides a linear output (both digital and analogue) and it can easily be connected to any control system. Typical applications include sand, cement, concrete, asphalt and aggregates. For organic materials the Hydro-Probe XT is recommended.

Designed for use in processing plants which use bins (silos), chutes and conveyor or feed belts, the sensor is positioned into the flow of material. Measurements are taken 25 times per second as the material passes over or around the sensor face, meaning that the sensor can rapidly detect changes in moisture levels. Real time adjustments to the moisture content of the material can then be made during processing if required. This ensures that the manufacturer can continually produce a consistent, quality product and reduce costs by limiting the amount of wasted or spoilt materials.

The sensor can be installed in a variety of locations where there is a flow of material. Some typical examples can be found on our installations page. A range of accessories are available including extension mounting sleeves and clamp rings to assist with fitting.

Technology: Digital Microwave
Measuring Range: Up to saturation of Material
Body Construction: SS316
Face Plate: Ceramic
Temperature: 0 to +60ºC
Microwave penetration: 75 – 100mm dependent on material
Readings/second: 25
Accuracy: +/-0.2
Supply: 15 – 30 V DC

DISPENSING EQUIPMENTS - OIL TRANSFER

R100S - Stub Pump
R100T - Drum Pump
R100THG - Complete System
The R100 is a 1:1 heavy-duty ratio oil pump designed to transfer oils up to 10 metres and can be used with any of Macnaught’s hose end gun range.

Suitable for oils up to SAE 140, automatic transmission fluid, diesel, kerosene, anti-freeze/anti-boil
Designed to fit from 60 L (16 US gal) to 205 L (55 US gal) drums (optional suction tube available for stub version) (TB17S)
2” (M) bung adaptor and oil lubricator supplied (TA-3K)
The R1000THG (complete system) includes the R100T drum pump, 3 m (10 ft) reinforced delivery hose and trigger action dispensing nozzle
10 year warranty
10 year parts availability

OIL CONTROL GUN

Supply Battery
Flow range 1 – 30LPM
Inlet 1” BSP F
Display Mechanical / Digital
Extension Rigid
Media SAE140, Engine/Gear/Hydraulic/Coolant
Pressure 1500 Psi max

Wetted Components: Aluminium, Nitrile Rubber, Carbon PTFE, Zinc plated carbon steel and brass
Pump Ratio: 1:1(oil pressure is the same as air pressure)
Output: 60 L/min (16 US gal per min) of SAE 10 oil at 690 kPa (100 psi) air pressure(free flow)
Suction Tube Length: R100S (stub) 220 mm (8 3/4”)
Max. Air Pressure: 1 030 kPa (150 psi, 10.3 bar)
Min. Air Pressure: 400 kPa (60 psi, 4 bar)
Min. Air Compressor: 0.22 m3/min (8 cfm)
Air Inlet: 1/4” NPT (F)
Pump Inlet: 3/4” BSP or NPT (F)
Pump Outlet: 3/4” BSP or NPT (F)
Foot Valve Inlet: 1” BSP or NPT (F) (stub only)

DISPENSING EQUIPMENTS - FUEL TRANSFER

The GP Rapid-Flo is a durable, high quality impellor pump incorporating a gearbox for high output (up to 100 L per minute) and easy operation. Designed for 205 L (55 US gal) or 60 L (16 US gal) drums, this pump is ideal for any fuel transfer task.

Pumps diesel, petrol, av gas, kerosene and lubricating oils up to SAE 30
Ideal for high volume aviation fuel transfer
Supplied with a 2.4 m (8 ft) anti-static rubber delivery hose and nozzle, and 1.06 m (3.5ft) two piece threaded suction tube Pumps easily in both directions
Lockable handle and built-in nozzle holder
In-built strainer
50 mm (2”) bung adaptor
Optional HNU nozzle for unleaded fuel
10 year warranty
10 year parts

Supply 12 / 24 V DC / 250 V AC
Discharge 40 / 70 LPM
Protection IP55
On / Off switch Included
Cable 2m with Alligator connector
Media Diesel Only
Fuse Yes
Duty Cycle 30min
Section / Delivery House 1” X 2m / 1” X 4m

DISPENSING EQUIPMENTS - FUEL METER

DM100 & DM150 FLOW METER PLUS FILTER
The DM100 has been designed to measure diesel, kerosene and petrol, and is made from corrosion resistant aluminium with easy to read mechanical register.

Oval gear design
Low pressure drop allows for gravity and pump (in-line) applications
Register cap can be easily removed and rotated to every 90° orientation for display reading
Supplied with integrated mesh strainer
10 year warranty
10 year parts availability

Wetted Components: Aluminum, Zinc plated Carbon Steel, PEI Resin, Viton
Accuracy: ± 1% of reading
Accuracy: 3 - 80 L/min (0.8 - 21 US gal/min)
Max. Pressure: 1000 kpa (145 psi, 10 bar)
Register – Totaliser: 0 – 999,999 L (gal)
Register – Reset: 0 – 999.9 L (gal)
Max. Temp: 80° C (176° F)
Inlet Thread: 1” BSPT, 1” BSPPL(G) or 1” NPT female
Outlet Thread: 1” BSPT, 1” BSPPL(G) or 1” NPT female
Weight: 1.2 kg (2.6 lbs)

DISPENSING EQUIPMENTS - HOSE REEL

Retracta® is the robust market leader in rewind hose reel systems.
Retracta® is the answer to storage and safety problems, and the wide range of models allows the reel to be used in any industry work environment.

Superior positive latching mechanism allows the reel to be mounted in any position
Weather resistant, high impact uv stabilised polypropylene
Safe storage system that keeps hoses off the floor
Versatile – average weight with hose is 12 kg
Low rewind tension allows for easy hose “pull out”
Full stainless steel mouth for improved hose and reel service life
Lockable wall or overhead mounting bracket bu100 is supplied with every hose reel purchase and allows for hose reel rotation through 180°
Optional bb100 bench or floor mounting bracket is available separately
An ability to have colour coded reels to suit any application or fit within an individual corporate look (conditions apply)
Fully repairable
10 year warranty
Guaranteed availability of spare parts for 10 years
ACCESSORIES
BB100 Retracta Branch Bracket

Brand: RETRACTA
Type: Air / Water / Oil /Gas / Foam / Grease
Length: 10, 15 & 20m
ID: 5, 6. 10, 12,5, & 16mm
Colour: Black, Blue, Green, Red
Hose material: Reinforced PVC / Rubber / NTP
Temperature: 60º0C / 90ºC
Pressure: Up to 3000psi

© Copyright 2018 www.pce-india.com - All Rights Reserved / Website by GAGA INT